Frame
Caster forks - 0.38 in thick caster yoke arms
Caster forks - 0.38 in thick caster yoke arms
Safety Features
Safety package - Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine.
Safety package - Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine.
Engine Make
Kawasaki
Kawasaki
Engine Model
FS481V, V-Twin Series
FS481V, V-Twin Series
Horsepower
18.5 hp @ 3,600 rpm
18.5 hp @ 3,600 rpm
Displacement
603 cc
603 cc
Fuel System
Carbureted
Carbureted
Air Cleaner
Air filter - Standard engine manufacturer
Air filter - Standard engine manufacturer
Starter
Recoil with 5A clutch coil
Recoil with 5A clutch coil
Fuel Type
Gas carbureted
Gas carbureted
Fuel Capacity
5 gal. (18.9 l) fuel tank
5 gal. (18.9 l) fuel tank
Steering
Control - Hydro drive with Enhanced Control System (ECS), forward / reverse, left / right or zero-turn
Control - Hydro drive with Enhanced Control System (ECS), forward / reverse, left / right or zero-turn
Deck Construction
10 ga. top that is formed and continuously seam welded, 7 ga. side skirt and 7 ga. welded spindle mounting locations for improved strength
Deck style - Floating deck
Deck style description - Full-floating UltraCut Series 3
10 ga. top that is formed and continuously seam welded, 7 ga. side skirt and 7 ga. welded spindle mounting locations for improved strength
Deck style - Floating deck
Deck style description - Full-floating UltraCut Series 3
Deck Lift
Manual lift with hairpin from hole to hole for position adjustment
Manual lift with hairpin from hole to hole for position adjustment
PTO
Engagement - Electromagnetic 105 ft. lb. clutch
Engagement - Electromagnetic 105 ft. lb. clutch
Spindles
Blade - No maintenance, sealed and non-greaseable spindles; 7.75 in. diameter cutter housing with 25 mm (0.98 in.) diameter spindle shaft and splined blade driver
Blade - No maintenance, sealed and non-greaseable spindles; 7.75 in. diameter cutter housing with 25 mm (0.98 in.) diameter spindle shaft and splined blade driver
Blades
3 at 16.25 in. length
3 at 16.25 in. length
Blade Tip Speed
Approximately 18,500 fpm
Approximately 18,500 fpm
Discharge
Side discharge standard, with molded discharge chute and option to bag or mulch
Side discharge standard, with molded discharge chute and option to bag or mulch