Width
Transport - 6 ft. - 8 in.
Transport - 6 ft. - 8 in.
Cutting Capacity
2 mph = 3.39 acres / hr.
4 mph = 6.78 acres / hr.
6 mph = 10.17 acres / hr.
2 mph = 3.39 acres / hr.
4 mph = 6.78 acres / hr.
6 mph = 10.17 acres / hr.
Overall Length
Mowing Position - 14 ft. - 10 in.
Transport Position - 12 ft. - 11 in.
Mowing Position - 14 ft. - 10 in.
Transport Position - 12 ft. - 11 in.
Cutting Width
14 ft.
14 ft.
Height
Transport - 7 ft. - 7 1/2 in.
Transport - 7 ft. - 7 1/2 in.
Cutting Height
3/4 - 5 1/4 in. (In 1/4 in. increments)
3/4 - 5 1/4 in. (In 1/4 in. increments)
Overall Width
14 ft. - 3 in.
14 ft. - 3 in.
Weight
3,000 lb. with 15 in. tires
3,150 lb. with 18 in. tires
3,000 lb. with 15 in. tires
3,150 lb. with 18 in. tires
Cutting Angle
Wing Flex - 23° left to right, 22° front to back
Center Deck Flex - 10° left to right, 22° front to back
Wing Flex - 23° left to right, 22° front to back
Center Deck Flex - 10° left to right, 22° front to back
Tires
Deck - 10 each, air tires with sealant 18 x 9.5 or 15 x 6.6
Deck Wheel Spindles - 1 1/4 in. with Nylon Bushings
Transport - 2 each, 23 x 10.5 with sealant
Deck - 10 each, air tires with sealant 18 x 9.5 or 15 x 6.6
Deck Wheel Spindles - 1 1/4 in. with Nylon Bushings
Transport - 2 each, 23 x 10.5 with sealant
Blade Size
5/16 x 2 1/2 x 20 29/32 in.
5/16 x 2 1/2 x 20 29/32 in.
Number of Blades
3 (each per deck)
3 (each per deck)
Tractor Requirements
40-70 hp
Kubota Matched - L / MX / M
40-70 hp
Kubota Matched - L / MX / M
Tractor Size
Minimum - 40 hp
Maximum - 70 hp
Minimum - 40 hp
Maximum - 70 hp
Drive
Main Driveline - Cat. lV constant velocity with slip clutch
Gearbox Support - 3/8 in. steel channel
Gearboxes - 540 rpm
Main Driveline - Cat. lV constant velocity with slip clutch
Gearbox Support - 3/8 in. steel channel
Gearboxes - 540 rpm
Operating Speed
Blade Spindle Speed - 3,362 rpm
Blade Spindle Speed - 3,362 rpm
Anti-Scalp Roller
Front Center and Outside Deck Corners
Front Center and Outside Deck Corners
Hitch
Pull Type with Adjustable Clevis and Safety Tow Chain
Pull Type with Adjustable Clevis and Safety Tow Chain
Blade Tip Speed
18,396 fpm
18,396 fpm
Deck Thickness
3/16 in.
3/16 in.
Drive Belt Tension
Spring loaded idler with overcenter release
Spring loaded idler with overcenter release
Deck Frame
Drivelines - Cat. II
Size and Quantity - 3 each / 60 in.
Overlap - 6 in.
Drivelines - Cat. II
Size and Quantity - 3 each / 60 in.
Overlap - 6 in.
Blades
Low lift
Drive Belt - 1 B-Section
Bearing - Sealed Ball
Low lift
Drive Belt - 1 B-Section
Bearing - Sealed Ball
Wheel Arm Pivot Shaft
1/4 in. wall square tubing
1/4 in. wall square tubing
Blade Overlap
1 1/4 in.
1 1/4 in.